Complete your setup
Within reach of the bartender
Cut to the width of your bar
Fitted in seconds
Engraved logo
Steady on its brackets
For the Folding Bar
Fitted in seconds, without tools
Fold down the brackets
Hang the rack
Cut to each Folding Bar
No cable across the floor
Developed to match your specific needs. Everything is designed to function as a natural extension of the bar, so your setup always feels complete.
Every add-on is designed to enhance your Bartisan bar system.
The Speed Rack mounts on the work surface, right where the bartender's hands already are. It is brushed stainless steel, easy to clean, and made to the width of the bar: 9 bottles at 90 cm, 12 at 120 cm and 15 at 150 cm. It goes on and comes off in seconds, so it is only there when the job needs it.
Holds 9, 12 or 15 bottles, matching a 90, 120 or 150 cm bar
Goes on and comes off in seconds, without tools
Purpose-built brackets keep it straight and steady
The LED light transforms the bar from functional to atmospheric. The warm white light creates a soft glow across the work surface and highlights the front, making the bar inviting even in darker environments.
Integrated into the frame with concealed cabling
Warm white light at 3000K with a water-resistant construction
Illuminates both the work area and the front
Wirelessly powered by Bartisan Battery Module
The Bartisan Battery clicks into a bracket inside the bar and runs the LED light for up to 24 hours on one charge. There are no cables across the floor and no need to plan the layout around power outlets. The charging stands link together, so a whole set of batteries charges in one place.
Full brightness for about the first 8 hours, then it steps down by itself – up to 24 hours of light per charge
Clicks into a dedicated bracket inside the bar
Charging stands link together, so many batteries charge in one place
CE certified, with safety documentation available on request
BarLink is the clamp that turns separate modules into one setup. It aligns the modules and locks them together, so a long run or an island behaves like a single piece of furniture. Two modules connect in seconds and a full layout in under a minute, which keeps setup time low however large the bar is.
Connects two modules in seconds, without tools
A full layout is connected in under a minute
Carbon-fibre-reinforced ASA, rated up to 75 kg per clamp
Powers the LED light without cables, so the bar can stand wherever the event needs it, not where the sockets are.
Keeps the most-used bottles within reach of the bartender, which speeds up service. Cut to the width of the bar and fitted in seconds without tools.
A brushed stainless steel rack on the bar's work surface, where the bartender's hands already are. Cut to the width of the bar and fitted without tools.
The most-used bottles stand on the work surface, right where the bartender's hands already are. Less reaching and turning means faster service.
The rack is made to the width of the bar it goes on: 9 bottles at 90 cm, 12 at 120 cm and 15 at 150 cm. It matches the bar, so it reads as part of it.
The supporting brackets fold down on the work surface and the rack hangs on its pegs. No tools, and it comes off just as fast when the bar travels.
1 mm stainless steel with a brushed finish, easy to wipe clean.
The Bartisan logo is engraved into the steel on the front, at the left end.
Purpose-built brackets keep the rack straight and steady while it is loaded.
The Speed Rack goes on the work surface of a Folding Bar, in the width of the bar: 90, 120 or 150 cm.
Flip down the supporting brackets on the bar's work surface.
Place the Speed Rack on the pegs. It comes off the same way.
The Speed Rack is made in three widths to match the Folding Bar: 90, 120 and 150 cm. Choose the rack for your bar, or add the bar and the rack together.
Powers the LED light without cables, so the bar can stand where the event needs it, not where the sockets are.
The light runs on the battery, so no cable crosses the venue and no extension lead lies where guests walk. The bar stands where the event needs it.
The light holds full brightness for the first hours, then steps down on its own to make the charge last.
A battery comes out of the bar without tools and charges on its own stand. With an extra one, a charged battery is always ready to swap in.
Up to 24 hours of light on one charge. Full brightness for about the first 8 hours, then it steps down automatically.
The batteries charge on a stand, never in the bar. The stands connect to one another, so a full set charges side by side in one place.
The housing has a tongue-and-groove edge, so batteries slot together into one long, sturdy line that keeps them organised.
The battery module is CE certified. Safety documentation is available on request.
No tools. Click it in, plug it in, press the button.
The battery sits in a dedicated bracket inside the bar.
The cable ends in a right-angled plug that fits the bar's socket.
The ring around the button lights when the battery is plugged in. A press fades the light on.
Clicks into a bracket inside the bar, no tools
Full for about the first 8 hours, then it steps down automatically
On a linkable charging stand, never in the bar
CE certified, safety documentation on request
The tool-free clamp that joins Bartisan modules into one solid setup, in seconds.
Made of carbon-fibre-reinforced ASA, so it stays light at about 80 g and still holds up to 75 kg per clamp.
Two BarLink join two modules. Four fix a Back Bar to the Folding Bar below it.
Bar to bar, bar to corner and bar to Back Bar: straight, L-shaped, U-shaped, curved, island and custom layouts.
A strong, light plastic: about 80 g per connector, rated up to 75 kg per clamp.
BarLink is Bartisan's own design and is proprietary and design-protected.
Unfold each module first. BarLink joins them afterwards and does not fold anything.
Line the second module up and push it against the first.
Lock the BarLink. The two modules now behave as one.
BarLink connects bar to bar, bar to corner and bar to Back Bar. Each Folding Bar already comes with two. A larger layout needs more.
Two join two modules, four fix a Back Bar
- Add-ons
- Explore bars & modules
- Explore branding options
- Explore storage & transport
- Speed Rack
- 1 mm brushed stainless steel
- 9 bottles
- 780 mm
- 90 mm
- Stainless steel
- 1 mm
- Brushed
- 12 bottles
- 1080 mm
- 15 bottles
- 1380 mm
- Capacity
- Width
- Wall height
- Material
- Thickness
- Finish
- Installation
- Power
- Colour temperature
- Water resistance
- Voltage
- Size (LxWxH)
- Weight
- Max. clamping force
- Operating temperature
- Compatibility
- LED-Light
- Up to 24 hours of operation per charge
- Permanently installed during production
- Powered by Bartisan Battery
- 3000K Warm White
- Up to 24 hours
- Bartisan Battery
- 11.1 V DC